![l2tp with ipsec on mikrotik routeros l2tp with ipsec on mikrotik routeros](https://netpro.lv/wp-content/uploads/2020/12/2.png)
Once I found a tutorial with creating custom IPSec ModeConfigs and Policies, but it didnt work with L2TP/IPSec. Step 7: The next step is to select what you want to be sent to the VPN tunnel. I can be wrong but I doubt pushing split networks is available with L2TP/IPSec in Mikrotik configuration. However when adding a static route on Fortigate it isn't possible to just set it as "192.168.10.0/255.255.255.0" through "192.168.100.131" because FortiOS says there's no such gateway available - and the only other option is to set "192.168.10.0/255.255.255.0" route through the above-mentioned "localVPN" interface - however it doesn't seem to work. Step 1: Access the terminal on your MikroTik hardware (RouterOS) settings. However I also want remote hardware behind Mikrotik (on a 192.168.10.0 network) being accessible by local computers in the main 192.168.0.0 network DOM2 (here the L2tp client, with the router 1 communicates via L2tp (open UDP/1701 to 1) through the provider of your home network (not pppoe interface). 1 (on the L2tp server, the router in the Internet goes through PPPoE) 2. For this to work Strongswan and mpd5 need to be installed on the client. On Mikrotik I've added a static route which leads into 192.168.0.0/24 through 192.168.100.130 and it works well, all local hardware to Fortigate is available to everything remote behind Mikrotik through its 192.168.0.0 range. Hello The task is as follows: There are three Mikrotik router. This is a short guide to setup a FreeBSD L2TP/IPsec client, by using mpd5 and IPsec, to connect to a Unifi L2TP/IPsec server (using a shared key). Fortiage FG60E (192.168.0.1) is a Windows-like L2TP/IPSec VPN server (interface name is "localVPN") to which all remote clients connect as well as providing an access to local physical clients.Ĭurrently Mikrotik hEX (192.168.10.1) is connected to it remotely through VPN and has a 192.168.100.131 address.